金沙js5官网在线-金沙js5线路

网站公告:

资讯中心

金沙js5官网在线

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:

常见问题

当前位置:金沙js5官网在线 - 资讯中心 - 常见问题 - 气动液体增压泵出口压力与

气动液体增压泵出口压力与空气驱动压力的关系

发布时间:2019-10-06 17:52:03   发布人:
  气动液体增压泵出口压力与空气驱动压力有关。气动增压泵工作介质可用水,可靠性高,免维护,使用寿命长。气动增压泵是柱塞泵。工作时,增压泵快速往复工作。当输出压力接近设定压力时,泵的往复速度减慢至停止。此时,泵输出压力恒定,能耗低,部件开始运动。
  The outlet pressure of pneumatic liquid booster pump is related to the air driving pressure. The working medium of pneumatic booster pump can use water, which has high reliability, maintenance-free and long service life. Pneumatic booster pump is a plunger pump. When working, the booster pump works rapidly to and fro. When the output pressure approaches the set pressure, the reciprocating speed of the pump slows down to stop. At this time, the output pressure of the pump is constant, the energy consumption is low, and the components begin to move.
  气动液体增压泵系统根据客户的实际需要,将气动液体增压泵、油箱(水箱)及部件组装成管状框架或密闭箱,结构紧凑,使用方便。压力调节器、压力表、阀门等都安装在面板上。输出压力可以通过设置驱动压力调节器来调节。当达到设定压力时,泵将自动停止。当压力下降时,泵将恢复工作。
  The pneumatic liquid booster pump system assembles pneumatic liquid booster pump, oil tank (water tank) and its components into tubular frame or airtight box according to the actual needs of customers. The structure is compact and the use is convenient. Pressure regulators, pressure gauges, valves, etc. are installed on the panel. The output pressure can be adjusted by setting a driving pressure regulator. When the set pressure is reached, the pump will stop automatically. When the pressure drops, the pump will return to work.
金沙js5线路
  气动液体加压系统设备的技术参数及部件,液体工作压力在0-640mpa之间可自由调节,介质通常为水或油。气动液体增压系统采用单气控不平衡气体平衡配气阀,实现泵的自动往复运动。泵体所有零件均采用铝合金制造,铝合金零件经过加工后,氧化成黑色,确保产品外观美观,永不生锈。泵的全套密封采用进口优质产品,保证泵的性能。
  The technical parameters and components of pneumatic liquid pressure system equipment can be freely adjusted between 0 and 640 mpa. The medium is usually water or oil. The pneumatic liquid supercharging system adopts single gas control unbalanced gas balance valve to realize the automatic reciprocating motion of the pump. All parts of the pump body are made of aluminum alloy. After processing, the aluminum alloy parts are oxidized to black, which ensures the appearance of the products is beautiful and never rusts. The whole seal of the pump adopts imported high-quality products to ensure the performance of the pump.
  设备组由油箱、气动增压泵、管线站组成,包括气压表、高压表、调压阀、低压开关、高压开关。预留接口尺寸和驱动气体入口尺寸通常设置为直径12mm的直塞头。
  The equipment group consists of fuel tank, pneumatic booster pump and pipeline station, including barometer, high pressure meter, pressure regulating valve, low pressure switch and high voltage switch. The size of the reserved interface and the inlet size of the driving gas are usually set as straight plug with diameter 12mm.
  手动控制:连接设备与空压机→调节调压阀→开启高压开关→开启低压开关开始实验→加压至所需压力关闭。开始保持压力→保持压力完成,关闭每个开关,实验室结束。喷在盒子的外表面。各液压元件连接可靠,不允许漏油。连接管为不锈钢材质。
  Manual control: connecting equipment and air compressor regulating pressure regulating valve opening high-voltage switch opening low-voltage switch to start experiment pressurizing to the required pressure to close. Start to maintain the pressure maintain the pressure to complete, close each switch, the laboratory is over. Spray on the outside of the box. The hydraulic components are connected reliably and oil leakage is not allowed. The connecting pipe is made of stainless steel.
  以上是金沙js5线路厂家为大家先容的相关内容,本文来源:Above is the related content introduced by the manufacturer of gas-liquid supercharged pump. The source of this article is .
 

13188935873

qq

XML 地图 | Sitemap 地图