The moisture-proof of equipment in summer is divided into two steps, one is the moisture-proof outside the pneumatic equipment, the other is the moisture-proof inside the pneumatic equipment.
External moisture-proof of air pressure system equipment: external moisture-proof is mainly to create a moderate and reasonable environment.
The relative humidity of machine tool working environment can reach 80%. But in summer, the air humidity in South China is generally more than 90%, so dehumidification is needed in the workshop. Common cooling schemes can achieve certain dehumidification effect. However, if the humidity is still high, professional dehumidifiers, such as dehumidifiers, are required. Now many service providers provide a complete set of workshop cooling and dehumidification scheme, and qualified manufacturers can carry out overall transformation of the workshop. In addition, workshop staff usually need to pay attention to closing the doors and windows of the warehouse and workshop, especially the doors and windows facing south and Southeast (air inlet), to prevent moisture from entering the room. If ventilation is required, open the north facing window in the car or at night, when the climate is relatively dry.
Internal moisture-proof of air pressure system equipment: key inspection and maintenance of internal moisture-proof.
Including inspection and replacement of liquid and oil, dust accumulation inspection, etc. In the hot summer, the liquid, oil and other substances commonly used in the air pressure system equipment are easy to deteriorate, and the wet weather is also easy to cause dust adhesion and failure. Therefore, this aspect of screening must be more cautious.
In the aspect of maintenance, the air pressurization system equipment can be operated to achieve the purpose of moisture-proof. If the air booster is not used, always ventilate and idle the air booster (dry air). It runs every day in the rainy season with high air humidity, and uses its own heat to drive away the moisture inside the equipment. Ensure that the performance of components of pneumatic pressure system is stable and reliable. In a word, pay more attention to check that the air pressurization system equipment is susceptible to the influence of humid air, and do a good job of replacement and cleaning in advance, no matter how difficult it is in summer.
The above is the relevant content introduced by the gas-liquid booster pump manufacturer. For more information, please visit the website: